Full Height Version of "DIRESTA Wood Stool "

Full Height Version of "DIRESTA Wood Stool " - image 3

Full Height Version of "DIRESTA Wood Stool " - image 4

Full Height Version of "DIRESTA Wood Stool " - image 5

Full Height Version of "DIRESTA Wood Stool " - image 6

Full Height Version of "DIRESTA Wood Stool " - image 7

Tim Belcher

Published Jun 23, 2016

Favorite Preview

Description

Well, we bought a big x-carve... lets make a big stool. This version is a 29.5 inch tall bar stool. It uses almost the entire 31 x 31 inch space of the large x-carve. I also am including the g-code for a DIRESTA vcarve, removing any need to fix the A.

3 Favorites

123 Views

0 Comments

67 Copies

Specs

Material: Birch Plywood

Remake of

DIRESTA Wood Stool

Instructions

Watch the Diresta Video

This is designed for 3/4 inch stock, and includes a gcode file for the DIRESTA logo using a v-carve, therefore you will not need to fix the A. (It also looks a lot better).

Be careful with this, as a large portion of the sheet is used. I increased the tab height to .2 inches, given so much of the sheet could come loose. I start with an oversized 32 x 32 inch sheet and use double sided tape. I then move my X and Y as close to the bottom left as I can. This entire design will fit into a 30x30 however.

Cheers,

Tim