"Gears of Creation" Sign

All the files for this project can be made with plywood, like the Easel project above, but my images of my finished product was done using aluminum sheet, MDF, Plywood, and HDPE from Inventables materials. If you would like to create it as I did, and of course you could change out their logo for your own, use the Easel file links below.

List of Materials:

2 - Washers 1 - Screw 1- Plastic Tube 1” Long with .25” OD (Any Hardware Store) 1 - Flange Plastic Tube approx 1” Long (Any Hardware Store) Zipties

Plywood (1/8” 18x24): Material: https://www.inventables.com/technologies/baltic-birch-plywood--2

MDF (1/2” 12x24): Material: https://www.inventables.com/technologies/mdf-wood Easel File: https://easel.inventables.com/projects/HsrXbkmGy4XQmEQK7gL5gQ

Black Aluminum Sheet (12x12) Material: https://www.inventables.com/technologies/black-anodized-aluminum-sheets Easel File: https://easel.inventables.com/projects/Sj98tVpiPYnPVlNLGck54w

Yellow HDPE (1/4” 12x12): Material: https://www.inventables.com/technologies/two-color-hdpe-yellow-on-black Easel File: https://easel.inventables.com/projects/7BZTNOMCTztbbrV3UM0Vyg

Electric Motor: https://www.amazon.com/gp/product/B07TFDPZP7/ref=ppxyodtbsearchasintitle?ie=UTF8&psc=1

LED Lights with Remote (pick your color and lighting effects): https://www.amazon.com/dp/B089XVPTKC?psc=1&ref=ppxyo2dtbproduct_details

Sprocket Bolts: https://www.rockymountainatvmc.com/parts/primary-drive-sprocket-bolt-and-nut-kit-p

Estimated time: 160 minutes