Interlocking Brick
Description
This file will carve (2) bricks, and you will have to flip the workpiece 180 degrees in the 'X' direction.
Double check the size and depth against your work piece. To reduce carve time you can decrease the depth of the cut on the underside of the brick.
35
Favorites
160
Views
0
Comments
71
Copies
Specs
- Machine
x-carve 2016
- Material
Birch Plywood
License
Attribution 3.0 Unported (CC BY 3.0)Attribution 3.0 Unported (CC BY 3.0)
You are free:
- to Share — to copy, distribute and transmit the work
- to Remix — to adapt the work
- to make commercial use of the work
Under the following conditions:
- Attribution — You must attribute the work in the manner specified by the author or licensor (but not in any way that suggests that they endorse you or your use of the work).
With the understanding that:
- Waiver — Any of the above conditions can be waived if you get permission from the copyright holder.
- Public Domain — Where the work or any of its elements is in the public domain under applicable law, that status is in no way affected by the license.
- Other Rights — In no way are any of the following rights affected by the license: ** Your fair dealing or fair use rights, or other applicable copyright exceptions and limitations; ** The author's moral rights; ** Rights other persons may have either in the work itself or in how the work is used, such as publicity or privacy rights.
Comments