Blessed Are The Peacemakers
Description
30x16 Pine with blue epoxy inlay.
21
Favorites
183
Views
3
Comments
130
Copies
Specs
- Machine
X-Carve
- Material
Pine
Tags
License
Attribution-NonCommercial 3.0 Unported (CC BY-NC 3.0)Attribution-NonCommercial 3.0 Unported (CC BY-NC 3.0)
You are free:
- to Share — to copy, distribute and transmit the work
- to Remix — to adapt the work
Under the following conditions:
- Attribution — You must attribute the work in the manner specified by the author or licensor (but not in any way that suggests that they endorse you or your use of the work).
- Noncommercial — You may not use this work for commercial purposes.
With the understanding that:
- Waiver — Any of the above conditions can be waived if you get permission from the copyright holder.
- Public Domain — Where the work or any of its elements is in the public domain under applicable law, that status is in no way affected by the license.
- Other Rights — In no way are any of the following rights affected by the license: ** Your fair dealing or fair use rights, or other applicable copyright exceptions and limitations; ** The author's moral rights; ** Rights other persons may have either in the work itself or in how the work is used, such as publicity or privacy rights.
Comments
Well I like the design but how do you do the stripes and the badge part.
Michael Brite · November 22, 2022
We just tried it but did a 7x14 and it didnt do well at all. this was our first project so im sure its our fault? The writing on the bottom was never attempted and the stars didnt come out. just made little circles. Any help would be greatly appreciated. This is a beautiful project!!
Peggy MatthewsPro · December 19, 2025
This is not my project, but you will need to add a detail but smaller than 1/8
John RaglandPro · July 17, 2026