Skip to main content

Locker Organizer

Beyond Design

Beyond Design

Published Apr 08, 2016

Favorite Preview

Description

A wall mounted organizer with a mirror and pegboard style grid. Small enough to fit in a locker, but could be used by your front door, at your desk, or anywhere else you need.

23 Favorites
85 Views
1 Comments
19 Copies

Specs

Material

Two-Color HDPE

Tags

Instructions

1

Mill hdpe sheet

Mill half inch HDPE with an 1/8th" bit for the main cut.

Use this EASEL "link":http://easel.inventables.com/projects/_-Od-EIyB9WF0lXazD6qow

Locker Organizer — Mill hdpe sheet
2

Mill Acrylic sheet

Mill the acrylic for the top half of the design. A silver mirror acrylic provides a nice mirror surface, or you could use a white acrylic to use as a whiteboard.

Use this EASEL "link":http://easel.inventables.com/projects/LlRfdYXYHXLjWegrj_SIKQ

Locker Organizer — Mill Acrylic sheet
3

Assembly

Once all of the parts are cut its time for assembly. The shelf will fit in using the tabs and slots, no glue should be needed. The mirror can be glued onto the front face after the shelf is in (make sure the shelled out portion is on the back). You can mount this to the wall with double sided tape such as the 3M adhesive strips.

4

Accessories

The dot grid is designed to the same dimensions of a standard pegboard. You can buy standard hooks from a hardware store to fit into the system. Or if you have a 3d printer available you can design your own accessories!