Cheeseboard with wood and corian
Instructions
1
Heads up
Hi everyone!! Thanks for your interest in this project. Since it is g-code based and we ran it on a Carvey, it should work if you use the same tools. However, this project is really just a demonstration of what's capable and hopefully inspires you to try something similar :)
Estimated time: 1 minutes
2
Comments
I like the joinery. Did you use glue?
John McWhirterPro · January 12, 2018
Thanks! Yup, and the half aspect of the joint has a large surface for the glue to work on instead of just a butt joint :)
Evan and Katelyn · January 13, 2018
what size endmill was used for this project?
Robert Capraun · February 02, 2018
1/8" upcut for the corian, 1/8" straight for the wood
Evan and Katelyn · February 02, 2018
sandbox won't let me modify. any thoughts?
Lewis Garvin · April 09, 2018
Let me clarify, I save a copy from Sandbox and the copy won't let me modify...
Lewis Garvin · April 10, 2018
Hi Lewis! It's g-code generated by Fusion 360 instead of a fully easel based design so you can't modify it in easel, sorry!
Evan and Katelyn · April 25, 2018
Thank you. I am going to attempt to make this tonight. I'll let you know how it goes... fingers crossed.
Lewis Garvin · May 23, 2018
So I load the file, set the home position and start the carve. However, the z-axis moves higher before beginning the cut. Any idea why or some direction you can give?
Lewis Garvin · May 23, 2018
Raising the bit to clearance height is part of the g-code so raising the bit before running the g-code just runs it in the air. To prevent Z axis from raising I click confirm home position, then back, then use last home position.
Evan and Katelyn · May 24, 2018
Any chance you could post your F360 models, interested in modifying the design and carving out designs for certain family members
Alex Deering · August 12, 2018
Love This! I wish it was in Easel!
Megan PalmieriPro · November 03, 2018