We use cookies to personalize content, interact with our analytics companies, advertising networks and cooperatives, and demographic companies, provide social media features, and to analyze our traffic. Our social media, advertising and analytics partners may combine it with other information that you’ve provided to them or that they’ve collected from your use of their services. Learn more.
I've made these from 3/4" UMDF, Black Walnut, and Purple Heart Wood so far. The shallow holes in the corners are for 8mm x 3mm magnets (available on Amazon) to hold the two pieces together. I rounded over the outer edges on my router table. I've also carved designs on the outer halves as well.
to Share — to copy, distribute and transmit the work
to Remix — to adapt the work
Under the following conditions:
Attribution — You must attribute the work in the manner specified by the author or licensor (but not in any way that suggests that they endorse you or your use of the work).
Noncommercial — You may not use this work for commercial purposes.
Share Alike — If you alter, transform, or build upon this work, you may distribute the resulting work only under the same or similar license to this one.
With the understanding that:
Waiver — Any of the above conditions can be waived if you get permission from the copyright holder.
Public Domain — Where the work or any of its elements is in the public domain under applicable law, that status is in no way affected by the license.
Other Rights — In no way are any of the following rights affected by the license:
** Your fair dealing or fair use rights, or other applicable copyright exceptions and limitations;
** The author's moral rights;
** Rights other persons may have either in the work itself or in how the work is used, such as publicity or privacy rights.
Comments
Great idea! I’m going to work on a couple of these this weekend
Would love to see how yours came out! You can tag us on Instagram as @voodoodaddydecals to share. I've also got more pics of the process and progress of these and other things I make in my spare time.
No. The lid is a mirror image of the bottom. Each half is 3/4” think, and carved 1/2” deep, giving a 1” space when closed, and allowing you to do a 1/16” or 1/8” deep carving in the outside of the lid, for decoration purposes.
No. The lid is a mirror image of the bottom. Each half is 3/4” thick, and carved 1/2” deep, giving a 1” space when closed, and allowing you to do a 1/16” or 1/8” deep carving in the outside of the lid, for decoration purposes.
Paul,
The minis section is the same depth as the dice spots, and I use mine to store more dice instead over lots of minis. Mine is lined with felt too. As far as using it as a dice rolling tray, it is a bit on the small side for that, but could be used in a pinch.
Would still love to see how all of yours came out! You can tag us on Instagram as @VDX_Designs to share. In addition, you can visit my Etsy shop at VDXdesigns.etsy.com to see how this design evolved over the past few years.
Comments
Great idea! I’m going to work on a couple of these this weekend
Chris Knuckles · May 06, 2019
Looks great. I’ll be making some as well
Jeff Davidson · May 06, 2019
Would love to see how yours came out! You can tag us on Instagram as @voodoodaddydecals to share. I've also got more pics of the process and progress of these and other things I make in my spare time.
Ken Howard · May 09, 2019
Also, here's a link to the magnets I used. They come in a package of 100. amazon.com/gp/product/B07B3SDRCP/ref=ppx_yo_dt_b_…
Ken Howard · May 09, 2019
Is the underside of the lid just flat?
Kurt Canez · February 03, 2020
No. The lid is a mirror image of the bottom. Each half is 3/4” think, and carved 1/2” deep, giving a 1” space when closed, and allowing you to do a 1/16” or 1/8” deep carving in the outside of the lid, for decoration purposes.
Ken Howard · February 03, 2020
No. The lid is a mirror image of the bottom. Each half is 3/4” thick, and carved 1/2” deep, giving a 1” space when closed, and allowing you to do a 1/16” or 1/8” deep carving in the outside of the lid, for decoration purposes.
Ken Howard · February 03, 2020
Great design! I've had a lot of enjoyment using this as a template!
William S Searles · September 25, 2020
Do you think the character tray would be big enough to support as a dice tray? Add felt to bottom?
Paul Santellana · July 11, 2021
Paul, The minis section is the same depth as the dice spots, and I use mine to store more dice instead over lots of minis. Mine is lined with felt too. As far as using it as a dice rolling tray, it is a bit on the small side for that, but could be used in a pinch.
Ken Howard · July 11, 2021
William, Thanks so much! This was the first dice box design that I made, and there are quite a few others that I’ve designed for my Etsy shop.
Ken Howard · July 11, 2021
Would still love to see how all of yours came out! You can tag us on Instagram as @VDX_Designs to share. In addition, you can visit my Etsy shop at VDXdesigns.etsy.com to see how this design evolved over the past few years.
Ken Howard · December 15, 2022