Acrylic Puzzle
Instructions
Chose color and texture
First chose the color of acrylic that you want for the puzzle. I chose pink fluorescent that was glossy on both sides. This makes the puzzle harder because the pieces can be oriented from either side. To make the puzzle easier you can chose a piece that has a matte finish on one side.
Estimated time: 5 minutes
3D carve the acrylic
In the video I used Red on White acrylic sheets. I did the project a second time where I used Carvey and put the fluorescent acrylic in the machine. Each material gives a bit of a different look and feel.
Remember to measure the thickness of your acrylic. The nature of the way cast acrylic is manufactured means the thickness can vary from the actual thickness.
Estimated time: 15 minutes
Comments
can you post the files for this?
Samantha Alaimo · September 10, 2013
The Easel file is posted.
Zach KaplanPro · November 16, 2015
Do you have advice about when and when not to use double stick tape to secure the piece on a thru cut?
Brad Sturgeon · July 14, 2016
I like to use it with materials 1/8" or thinner and any time clamps won't be able to hold the piece as parts are cut out. Puzzles are a great example. I like to pause Carvey as each puzzle piece is finished and take them out to avoid them coming loose and damaging other parts.
Zach KaplanPro · July 14, 2016