Monogrammed Box
Instructions
Open in Easel
You'll be cutting three materials for this project. Here are the Easel projects for each material:
3/4" Maple: http://app.easel.com/projects/aKi0qY-N5wayLmLuDPjUIw
1/8" Cherry http://app.easel.com/projects/jfqQboOtJibtNHV7E-aYOg
1/8" Maple http://app.easel.com/projects/h1hDwBNMLl1yzVWiXaoOSQ
Cut it Out
I used an 1/8" upcut spiral bit for the 3/4" maple and 1/8" cherry and a 1/16" fishtail to cut the letter in 1/8" maple.
Sand and Glue
I sanded the two pieces of 3/4" maple with 80 and 120 grit paper until the fit was snug but easy to seperate.
I sanded the 1/8" cherry and maple with 120 grit paper to clean up the edges and faces.
I glued the 3/4" maple and 1/8" cherry circles together and let them dry overnight.
The next morning I glued the 1/8" maple letter to the top of the box.
Finish
I used a little pure tung oil to protect and finish the box.
Comments
Looks great! All of the Easel links have an error that says, "This project has not been shared publicly". :(
Patrick Gibson · December 12, 2014
My apologies, Patrick. All of the files are public now. Happy making!
Tait LeswingPro · December 12, 2014
I can not get this to download or copy. Neal Palmer
Neal Palmer · January 04, 2015
Hi Neal. Did you try copying and pasting the URLs in Step 1?
Tait LeswingPro · January 05, 2015
This Project looks sweet!
Andrew Petzold · September 26, 2017
Why is that when I load the project all it brings up is the monogram for the lid. I am very new to this and trying to learn, any help would be appreciated.
Matt · August 03, 2022