Keychain Display

Steve Carmichael

Published Sep 27, 2020 · Carved

Favorite Preview

Description

Make a display rack for a Keychain Collection.

8 Favorites

46 Views

0 Comments

20 Copies

Specs

Machine: x-carve 2016
Material: Birch Plywood

License

Attribution 3.0 Unported (CC BY 3.0)

Instructions

Watch the Video!

Watch my video of this project then make one yourself!

Estimated time: 7 minutes

Customize the Design!

Click the button at the top of this page to open the project in EASEL. You can customize the text and adjust the number of holes for keychain pegs. Below are supplies I used: Baltic Birch 24"x30"x0.5" Axel Pegs from Hobby Lobby Spraypaint Wood Glue Spray Lacquer Angle Aluminum and Screws Hanging Hardware

Carve the Project!

Mount the plywood sideways on the X-Carve. Install a 1/8" bit and check all settings. Carve the letters and holes. Sand it smooth. Mask off the letters and spray inside the letter pockets. Sand off any excess paint. Glue in the pegs.

Estimated time: 45 minutes

Keychain Display — Carve the Project! (image 2)

Trim the Edges!

Trim the edges using angle aluminum. Cut mitered corners and drill holes for screws. Screw the pieces to the edges of the board. Add hanging hardware to the back.

Estimated time: 30 minutes

Display Keychains!

Hang the display rack securely on the wall, then add the keychains and enjoy!

"Click here to SUBSCRIBE to my YouTube channel!":https://www.youtube.com/user/carmichaelworkshop?sub_confirmation=1

"Click here to visit my website at www.TheCarmichaelWorkshop.com.":http://www.thecarmichaelworkshop.com/

Thanks for checking out my project! - Steve...