Skip to main content

Featherboard and Thin-rip Jig.

Robbtoberfest

Robbtoberfest

Published Oct 24, 2026 · Carved

Favorite Preview

Description

This is a featherboard and thin rip jig for my job-site table saw. The featherboard is for holding lumber snug against the fence while cutting. The thin rip jig lets one cut very thin pieces of wood with less risk of catching in the blade since it ejects to the left; for cutting edge band veneer.

0 Favorites
1 Views
0 Comments
1 Copies

Specs

Machine

Power Route Max (non-GRBL)

Material

Birch Plywood, half inch half sheet

Tags

Notes

1/2 inch plywood. You'll need to digitally adjust screw slot and lengths possibly to fit your needs. You'll need a skateboard type bearing and a bolt with washers and just thread the bolt into the hole. Also needed is a wing nut type thing and bolt to clamp it down into the table saw track.