Skip to main content

COIN BANKS

Antonio Santiago

Antonio Santiago

Published Dec 17, 2022

Favorite Preview

Description

All the credit goes to Phillip Lunsford for this project. I just used his technique to make all the letters. I use 3/4 MDF and plexiglass. Just wanted to share it with the ones asking for it or who don't have the time to make all the letters. Enjoy!!!

13 Favorites
116 Views
0 Comments
93 Copies

Specs

Material

ABS, Birch Plywood, MDF

Instructions

1

Cutting

All you have to do is cut the 2 pieces and glue them together. I used small #4 (1/2") flat head screws to attach the plexiglass. In the part where the slot is, don't worry about the screw holes, they are there just for reference. With the 1/4" bit you wont be able to drill them. The plexi glass that I used was .1 thick.